Appendix A - Specifications - Ness PowerPlex EDR400 Instruction Manual

–
/
/
Slider Bar –
Note. 1 The best viewer's environment is Internet Explorer 5.0 or above, 1024 x 768
If the PC is protected by the Firewall, please make sure Port 1600 is enabled
before accessed.
Note. 2 The Login Name and Password are the same as used in
the Administrator can operate all the functions on remote end, the Supervisor
can view the live video and playback image, and the Operator can only view
the live video.
Note. 3 You must have the upgrading software in your remote PC in order to remote
upgrade the system. Please contact your local distributor to obtain the
software.
Note. 4 The remote end will not be able to view all the camera windows if there's any
camera is set as 0 FPS for the normal recording rate; unless all the cameras are
set as 0 FPS.
Appendix A – Specifications
Video Format
Video Input
Video Output
Administrator's Guide and Operating Instructions
To stop the playback image. The playback image will starts
from beginning if the user click on the Play button again.
– Click on forward/backward play button to start
playing/reverse playing video on its corresponding window.
(Note.4)
– The next/previous single image corresponds to the selected
playback cameras will be played and displayed on its
corresponding video window.
– To pause the playback image.
Showing the current playing position for image
playback. Click on it and drag the mouse to play the
video from anywhere in the selected range.
NTSC/EIA or PAL/CCIR, auto-sensing & manual switch
4 camera inputs (BNC), 1Vp-p/75ohm
1 VGA monitor output, D-Sub 15 pin
55
e
DR400,