Setup (Administrator) - Ness PowerPlex EDR400 Instruction Manual

6. Setup (Administrator)

To login as an Administrator, please click on the Login icon, and enter the
appropriate Administrator's Login name and Password (the factory default
value for both of them is admin).
To setup the behaviors of the system, please click on the Config icon.
The configuration menu will pop up as below.
Click on the menu item for the respective configuration. For the details
of each item, please refer to the following paragraphs. Click on the Exit
menu item to exit the setup. You may be asked to restart the system for
those new settings to take effect.
Note: If the system is in Sequence Mode display (please refer to Chapter 4), the
Display Seqs menu item will be grayed and not accessible.
Administrator's Guide and Operating Instructions
16