Ness PowerPlex EDR400 Instruction Manual page 36

The Alarm Out Setup allows the administrator to define the tag name
for each Alarm Output. There are up to 2 Normally Closed (NC)
signals (AO 1-2) and 2 Normally Open (NO) signals (AO 3-4) for
the system.
Operations:
After the Alarm Out menu item is selected, the Alarm Out Setup
dialog box will be shown on the screen.
Please click on the item in the Alarm Out List, then click on the Alarm Out Tag, and
then enter the new tag name for the selected Alarm Output by using the mouse or the
keyboard. Define the behavior of the selected Alarm Output in the Trigger item, click
on On to enable, click on Off to disable.
Administrator's Guide and Operating Instructions
32