Version Display; Alarm Message Display - Ness PowerPlex EDR400 Instruction Manual

5.1 Version Display

5.2 Alarm Message Display

Administrator's Guide and Operating Instructions
Alarm, Motion, Video Loss, Hard Disk Full, and Power On/Off.
To view the event Log display, please click on the Log icon.
The screen will be shown as below:
If you logged in as Administrator, the Delete button and Delete All
button will be enabled. Click on the Delete button to delete the
highlighted event log, and click on the Delete All button to delete all
the event logs. For the alarm and motion action, if the action
happened during the post record time from the previous triggered
action, there will be no event record.
Click on the logo icon on the upper-right corner, the software version
of the system and a serial number will be shown on the screen.
The alarm message will be displayed on the screen if the alarm
happened and the alarm message for the corresponding action is on.
Please click on the leftmost icon in the alarm message window to
clear the alarm message.
15