Ness PowerPlex EDR400 Instruction Manual page 33

Note 1 : The maximum recording rate for the system is 25 FPS for PAL, 30 FPS for
NTSC. If the total recording rate for all cameras is greater than 25/30 FPS, the
system will decrease the recording rate for each camera averagely to make the
total 25/30 FPS.
Note 2 : The remote end will not be able to view all the camera windows if there's any
camera is set as 0 FPS for the normal recording rate; unless all the cameras are
set as 0 FPS.
Administrator's Guide and Operating Instructions
Video Loss Action – The corresponding Video Loss Action (always
enabled).
Normal Record (FPS) – The normal recording rate for the selected
Camera at the selected Time Type. Use the Up/Down arrow buttons
to adjust the value (0-30). The default value is 0.1 Frame Per Second
(or 6 Frame Per Minute). (Note)
Alarm Record (FPS) – The alarm-recording rate for the selected
Camera at the selected Time Type. Use the Up/Down arrow buttons
to adjust the value (0-30). The default value is 5 Frame Per Second
(or 300 Frame Per Minute).
29