Table of Contents
Advertisement
2.1.2
HDD Installation
Securely fix a hard disk by using bracket and screws provided herewith.
Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.
Otherwise, it may cause damage to the hard disk.
CAUTION
INSTALL HARD DISK AGTER DVR POWER IS OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HARD DISK. TO
TURN OFF DVR, PLEASE
SUPPLY AGAIN.
CAUTION
FOR INSTALLATION/ADDITION/REPLACEMENT/REMOVAL OF HDD (DVD-RW), MAKE SURE THAT DVR IS TURNED OFF.
OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE HDD (DVD-RW).
INSTALLATION/ADDITION/MOVING/REPLACEMENT: USER SHOULD START 'HDD INITIALIZATION' INCLUDING FORMATTING.
OTHERWISE, DVR WON'T RECOGNIZE THE HARD DISK AND MAY BEGIN TO FUNCTION ABNORMALLY. PLEASE FOLLOW THE
BELOW PROCEDURE FOR 'HDD INITIALIZATION'.
①
(DATE/TIME SETUP) SET UP THE CURRENT DATE AND TIME
②
(INITIALIZATION OF SYSTEM SETUP) ALL VALUES IN SETUP ARE RESTORED TO FACTORY DEFAULT SETTINGS
-
(SETUP>SYSTEM>INFORMATION>STATUS>SETUP>DEFAULT)
③
(HDD FORMAT) HDD FORMAT IS DONE BY SETUP>SYSTEM>ADMIN>STORAGE>FORMAT. IF THERE ARE MORE THAN TWO
HDDS, EACH MUST BE FORMATTED, SEPARATELY. WHEN THE FORMAT IS COMPLETED, DVR WILL AUTO-REBOOT.
REMOVAL: FOLLOW THE REMOVE PROCEDURE EVEN WHEN A PRE-INSTALLED HARD DISK HAS BEEN REMOVED. IN
-
SETUP>SYSTEM>ADMIN>STORAGE>FORMAT,
CORRESPONDING HDD TO DISCARD 'HDD' ITEM. WHEN THE REMOVE PROCEDURE IS COMPLETED, DVR WILL AUTO-
REBOOT.
2.1.3
Maximum HDD Capacity
Each model has a different HDD capacity recognition.
Below table shows the recommended maximum HDD capacity for each model.
Model
A Type
Capacity
3TB
2.1.4
DVD-RW installation
Securely fix DVD-RW by using bracket and screws provided herewith.
Please do not use any different DVD-RW cables (data cable and power supply cable) other than the ones we provide.
Otherwise, it may cause damage to the DVD-RW.
Only one DVD-RW can be used. Mount it at the SATA 4 port (B (4CH), C, D and E type).
For B (8/16CH) type, users should mount it at the SATA 5 port.
CAUTION
INSTALL DVD-RW OR/AND HARD DISK AFTER DVR POWER OFF. OTHERWISE, IT MAY CAUSE PERMANENT DAMAGE TO THE
HARD DISK. TO TURN OFF DVR, PLEASE
PLUGGING IN POWER SUPPLY AGAIN.
2.2 Connector Wiring
2.2.1
Video-In/Loop Out Connections
Ness IQ-SDI Users Manual
CLICK ( )
SETUP>SYSTEM>SHUTDOWN. ALSO, WAIT FOR 5 SECONDS BEFORE PLUGGING IN POWER
B Type
16TB
CLICK ( )
(SETUP>SYSTEM>ADMIN>DATE/TIME)
CLICK ( ) 'REMOVED'
ITEM UNDER THE DISCRETE FORMAT HEADINGS OF A
C Type
16TB
SETUP>SYSTEM>SHUTDOWN. ALSO, WAIT FOR 5 SECONDS BEFORE
D Type
E Type
16TB
16TB
12 |
P a g e
Advertisement
Table of Contents
