Dell 3115cn Service Manual page 368

Sensor name (Diag. Code)
Option Tray Feed Motor
Alarm (DI-f)
MPF No Paper Sensor (DI-10)
Tray 1 No paper Sensor (DI-
11)
Main Motor Alarm (DI-12)
Sub Motor Alarm (DI-13)
Version 1 2006.11.21
Internal signal.
NOTE: Remove the paper of the MPF before executing the test.
1) Turn on the power and enter the Printer Diag.
2) Execute the DI-10.
3) Open the MPF Cover.
4) Check the sensor.
Actuator
5) Press the "Cancel" key to stop the test.
6) Close the MPF Cover.
1) Turn on the power and enter the Printer Diag.
2) Execute the DI-11.
3) Remove the paper cassette.
4) Check the sensor.
5) Press the "Cancel" key to stop the test.
6) Replace the paper cassette.
Internal signal.
Internal signal.
2 - 27
Chapter 2 Operation of Diag.
Confirmation procedures
Operator Panel
Actuator Operator Panel
Normal
Kmy02012KA
Normal
Kmy02013KA