Removal 68 Top Cover (Pl13.1.1) - Dell 3115cn Service Manual

Removal 68 TOP COVER (PL13.1.1)

Steps 1 through 10 are for reference. Before removing this component, check that Steps 1 through 10
have been performed.
1) Open the FRONT COVER (PL13.2.1).
2) Remove the FUSER.(Removal 8)
3) Remove the REAR COVER. (Removal 49)
4) Remove the COVER BOTTOM. (Removal 50)
5) Remove the COVER POLE IN R.(Removal 51)
6) Remove the COVER POLE R.(Removal 52)
7) Remove the RIGHT COVER. (Removal 54)
8) Remove the COVER POLE IN L. (Removal 57)
9) Remove the COVER POLE L. (Removal 58)
10) Remove the LEFT COVER. (Removal 59)
11)
12)-2
11) Remove the three screws (silver, 6mm) and the one screw (silver, tap, 8mm) that fix the TOP
COVER (PL13.1.1) to the printer.
12) Lift the rear end of the TOP COVER to release the two bosses on the center front and the left
front on the TOP COVER from the hook and hole on the printer.
13) Lift the TOP COVER and slide it forward. Remove the TOP COVER from the printer.
Go to the next removal steps:
Removal 60 BOX ASSY PRT AIO (PL13.4.13) or Removal 70 INTERLOCK SWITCH
(PL13.5.3)
Version 1 2006.11.28
13)
Chapter 3 Removal and Replacement Procedures (RRPs)
12)-1
11)
12)-2
3 - 99
11)
11)
Gnb03177KA