Dell 3115cn Service Manual page 388

Clutch and Solenoid name
(Diag. Code)
Tray 2 Turn Clutch (DO-33)
Version 1 2006.11.21
1) Turn on the power and enter the Printer Diag.
2) Execute the DO-33. Upon hitting the "return" key, the operat-
ing noise of the clutch will be heard.
3) Press the "Cancel" key to stop the clutch.
Combination test is as follows.
NOTE: The Tray 2 turn roll rotates when the DO-19 and the DO-33
are executed. This procedure is for the technical staff.
1) Turn on the power and enter the Printer Diag.
2) Remove the Tray 1 paper cassette.
3) Execute the DO-19 and the DO-33.
4) Confirm the Turn Roll rotation.
5) Press the "Cancel" key to stop the clutch.
6) Press the " " key to display the DO-19.
7) Press the "Cancel" key to stop the motor.
8) Replace the Tray 1 paper cassette.
2 - 47
Chapter 2 Operation of Diag.
Confirmation procedure
Tray 2 Turn Roll
Kmy02033KA