Replacement 73 REAR COVER (PL13.1.6)
1)
Insert the rim on the upper side of the REAR COVER into the inside of the TOP COVER, and
then secure the REAR COVER to the printer with the five hooks of the REAR COVER.
2)
Secure the REAR COVER to the printer using the two screws (silver, 6mm).
Go to the next replacement step:
Replacement 38 FUSER (PL6.1.10)
Version 1 2006.11.28
Chapter 3 Removal and Replacement Procedures (RRPs)
1)-2
3 - 223
REAR
COVER
FRAME
1)-1
2)
2)
Gnb03221KA