Monitor Display - EverFocus EDR810H Insruction Manual

1.5 Monitor Display

The status information of the cameras or machine will show up, and be located at different
places on the screen.
Channel tag: A channel tag indicates the channel name of the screen.
1
Event sign: Event signals which are small icons with a capital letter and red
2
background show the events on each screen. There are 4 different signals
which are:
: Alarm event has taken place where the camera is located. In order to show
A
the video to a corresponding alarm, setting a FOCUS CAMERA in
ALARM SETUP MENU is necessary.
: Motion event has taken place and will shows up when the camera's
M
MOTION is enabled in MOTION SETUP MENU.
: Video loss event. Video loss event only shows when the camera's VLOSS is
V
enabled in VLOSS SETUP MENU, and the camera signal is lost.
: Sequence sign shows up when the display is in the sequence mode. The
S
sequence display is located on display with a "＊" sign in 4, 7, Full screen
and PIP (picture in picture) display mode. The
sign in the display when sequence occurs.
1. Channel tag
2. Event sign
3. Select sign
2. Event sign
4. Play status bar
5. Record status bar
sign will replace "＊"
S
9