EverFocus EDR810H Insruction Manual page 43

IP Address: This field is to set a static IP Address for the DVR. A static
IP address is an IP address whose value does not change. Everfocus
suggest using a static IP address. If your Internet provider does not offer
a static IP address you have the option to use a dynamic IP address. For
Example: A Test IP address given to the machine by our engineers is
192.168.010.002. When DHCP is YES, the DHCP server will assign this
value automatically.
Note: The Addresses in the machine are for our own testing
you must apply your own addresses to comply with your
network. Refer to Networking Chapter for more details.
To change this, simply use the Jog Dial on the DVR. Press the Enter key
to make your selection.
SUBNET MASK: This field is to set the subnet mask for your network
so as the DVR will be recognized within the network. Example:
255.255.255.000. When DHCP is YES, the DHCP server will assign this
value automatically. To change this, simply use the Jog Dial on the DVR.
Press the Enter key to make your selection.
GATEWAY: This field is to set the gateway for your network so the
DVR will be recognized within the network. An example of this is
provided within the DVR we use to test the machine within our own
network. When DHCP is YES, the DHCP server will assign this value
automatically. To change this, simply use the Jog Dial on the DVR. Press
the Enter key to make your selection.
DNS SERVER: This field is to set the DNS server for your network so
the DVR will be recognized within the network. An example of this is
provided within the DVR we use to test the machine within our own
network. Assign a DNS server to EDR810, for example: 168.195.001.001.
When DHCP is YES, the DHCP server will assign this value
automatically. To change this, simply use the Jog Dial on the DVR. Press
the Enter key to make your selection.
HTTP PORT: The default port number is 80. User can change it to
different port number for HTTP/WEB communication between DVR
and client PC.
35