Monitor Display - EverFocus 920 Instruction Manual

1.5

Monitor Display

The status information of the cameras or machine will show up, and be located at
different places on the screen.
1. Channel tag: A channel tag indicates the channel name of the screen.
2. Event sign: Event signals which are small icons with a capital letter and red
background show the events on each screen. There are a total of 6 different signals:
Alarm event. In order to show the camera video to a corresponding alarm,
A
setting a FOCUS CAMERA in ALARM SETUP MENU is necessary.
Motion event. Motion event only shows up when the camera's MOTION is
M
enabled in MOTION SETUP MENU, and the camera detects a motion.
Video loss event. Video loss event only shows when the camera's
V
VIDEOLOSS is enabled in VIDEOLOSS SETUP MENU, and the
camera signal is lost.
Sequence sign. Sequence sign shows up when the display is in the sequence
S
mode. The last display on the screen has a "*" sign in the top-middle. The
sign will replace the "*" in the display when sequence occurs.
S
Note: Sequence is invalid when all cameras are showing.
1. Channel tag
2. Event sign
3. Select sign
4. Play status bar
5. Record status bar
10