System Setup Menu - EverFocus EDR810H Insruction Manual

3.12

System Setup Menu

Diagram 3.23 is a screen shot of the SYSTEM SETUP MENU. This menu is for
setting up any additional options and restoring defaults to the digital recorder. In the
SYSTEM SETUP MENU the following fields are defined as follows:
SYSTEM VERSION: Current system firmware version.
SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the
input signal type automatically from camera 1 while system is booting up.
Users do not need to set it up.
Note: The signal type is detected by the camera 1, so camera 1
input has to be connected.
LOAD/SAVE CONFIGURATION:
YES: Turn the jog to enter the selection window, there are 4 options
available: CANCEL, DEFAULT, LOAD, and SAVE.
"CANCEL" for leaving the existing window. Select "DEFAULT" to
load factory default values. Select "LOAD" to upload and save DVR
configuration settings from USB. Select "SAVE" to save existing
Diagram 3.23
54
Select