EverFocus EDR410M Quick Installation Manual
Everfocus edr410m: install guide
Hide thumbs
Also See for EDR410M:
- Specifications (2 pages) ,
- Instruction manual (150 pages) ,
- Insruction manual (134 pages)
Related Manuals for EverFocus EDR410M
Summary of Contents for EverFocus EDR410M
- Page 1 Volume Quick Installation Guide...
-
Page 2: Quick Install Guide
Phone 626.844.8888 • Fax 626.844.8838 All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Corporation in the United States and other countries. -
Page 3: Safety Warning
Safety Warning WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. -
Page 4: Safety Precautions
Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within indoor type DVR for 0 C and a humidity below 90%. The input power source for this appliance is... - Page 5 Safety Precautions Read Instruction — All the safety and operating instructions should be read before the unit is operated. Retain Instructions — The safety and operating instructions should be retained for future reference. Heed Warnings— All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions—...
-
Page 6: Installation
The installations described below should be made by qualified service personnel or system installers. The EDR810M & EDR410M are the full-featured digital video recorders designed specifically for use in mobile applications. Please refer to the following Quick Installation Guide for installing EDR810M or EDR410M into mobile applications such as buses, cars and police cruisers. - Page 7 Quick Install Guide: 1. Unpack Everything Make sure you have everything you need before you begin the installation. 2. Equipment Required The following tools may help you to complete the installation: • Drill • Screwdrivers • Wire cutters 3. Choosing the Location Choose a location for installation that: Provides convenient access for installing or removing the hard drive •...
- Page 8 Possible Installation Locations inside the Automobile Vehicle: TOYOTA CAMRY Glove box (inside or underneath) Drive seat (between seat and wall) Show the wiring on the wiring harness that connects to the electrical system Trunk (Users are suggested to use “suspend” for mounting option) Passenger seat (underneath)
- Page 9 Possible Installation Locations inside the Automobile Vehicle: Truck Glove box (inside or underneath) D rive seat (between seat and wall) or Passenger seat (underneath) (Users are suggested to use “support” for mounting option) Show the wiring on the wiring harness that connects to the electrical system. (24 V) (5 A)
- Page 10 Installing the Camera(s) and Monitor The DVR is typically connected to one camera installed inside the car. Other camera(s) can also be installed in different locations (for example, use the waterproof camera to the outside of vehicle). For installation procedure, refer to the guide that came with the camera(s) you purchased.
-
Page 11: Hard Disk Drive Installation
Final Install Process Once you have completed t drive installation you are read to turn on the DVR. Simply plug the power source you installed earlier. The POWER LED lights will light up if power is normal. The next step is to set up the menu options for the DVR. - Page 13 European Office: Albert-Einstein-Strasse 1 D-46446 Emmerich, Germany TEL: 49-2822-9394-0 www.everfocus.de Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-...