3.2
Camera Setup Menu
Diagram 3.4 is a screen shot of the CAMERA SETUP MENU. This menu will walk
you through setting up the Camera Recording Speeds, Camera titles, covert modes, and
recording quality. In the CAMERA SETUP MENU the following fields are defined
as:
TITLE: The title setting allows you to assign a title to each camera input.
Titling with 12 characters is supported in each channel. To change this,
simply use the Jog Dial on the DVR. Press the Enter key to make your
selection. The available alphanumeric characters are:
0,1,2,3,4,5,6,7,8,9,
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
( ) . , + - / and an empty space.
PTZ ID: Select PTZ ID/Address from 001~255 or OFF. The default
value is 10+N where N is camera's number. This ID must be the same
as the ID used in PTZ Dip Switch. To change this, simply use the Jog
Dial on the DVR. Press the Enter key to make your selection.
INSTALL/COVERT: For installation of camera; select "ON" to
enable a camera, and "OFF" to disable it. Please make sure to stop
Diagram 3.4
19