Alarm Setup Menu - EverFocus EDR810H Insruction Manual

3.4 Alarm Setup Menu

Diagram 3.7 is a screen shot of the ALARM SETUP MENU. An alarm is defined
as an electrical, electronic, or mechanical device that serves to warn of danger by
means of a signal. In this case the signal triggers the recorder to start recording the
alarmed event. This menu contains all the alarm operations and options needed to
successfully complete an alarm recording. In the ALARM SETUP MENU the
following fields are defined as:
ALARM: This field is to turn alarm recording on or off. The Default
from the factory is set to on. To change this, simply use the Jog Dial on
the DVR. Press the Enter key to make your selection.
ENABLE: Enable alarm detection.
DISABLE: Disable alarm detection.
ALARM TYPE: This field is to turn alarm recording on or off. The
Default from the factory is set to on. To change this, simply use the Jog
Dial on the DVR. Press the Enter key to make your selection.
N. O.: Normal Open alarm.
N. C.: Normal Close alarm.
Diagram 3.7
25