1.5 MONITOR DISPLAY
The status information of the cameras or machine will show up, and be located at different places on the
screen.
Channel tag: A channel tag indicates the channel name of the screen.
1
Event sign: Event signals which are small icons with a capital letter and red background show the
2
events on each screen. There are 4 different signals which are
: Alarm event. The alarm place where the camera locates. In order to show the
A
camera video to a corresponding alarm, setting a FOCUS CAMERA in ALARM
SETUP MENU is necessary.
M
: Motion event. Motion event only shows up when the camera's MOTION is enabled
in MOTION SETUP MENU, and the camera detects a motion.
: Video loss event. Video loss event only shows when the camera's VLOSS is
V
enabled in VLOSS SETUP MENU, and the camera signal is lost.
S
: Sequence sign. Sequence sign shows up when the display is in the sequence mode.
The sequence display is located on display with a "*" sign in the last display of the screen.
S
The
Note: Sequence mode is unavailable only in 16-displays mode.
sign will replace "*" sign in the display when sequence occurs.
17
1. Channel tag
2. Event sign
3. Select sign
2. Event sign
4. Play status bar
5. Record status bar