Recording Overview; Instant (N) Recording Setup - EverFocus EDR810H Insruction Manual

Recording Overview

Before continuing with the Recording Overview please be sure to have reviewed DVR
Menu Setup (Chapter 3) specifically the camera & schedule. You are now ready to
begin setting up the machine for recording. This chapter will show you how to setup
the recorder for three basic types of recording: Instant recording, scheduled recording,
and event recording. Instant recording (N) is simple as it sounds its instantaneous,
basically manually pressing the record button for recording, much like pressing the
record button on a VCR. Scheduled recording (1~8) is based upon a set time period
of when to begin & end the recording. Event recording would consist of an alarm,
vloss or motion having taken place to trigger the DVR to record on that event.

4.1 Instant (N) Recording Setup

Press the Record key to start recording immediately.
REC
STOP
When REC is pressed, the pictures being monitored will be
recorded in the HDD.
• The recording rate, recording quality and recording speed can
be set in the CAMERA SETUP MENU. To set the target
camera for a particular recording speed /IPS (when using the
instant record method). Apply the changes to the last Time
Period (TP) row labeled N
• A "RECORD" sign appears in the record status bar.
Press STOP key to stop instant recording.
• The STOP key can be activated only in instant recording
mode, but not available in the schedule or event recording
mode.
• When the HDD is full, the machine will stop recording
automatically or overwrite from the beginning of the HDD. It
depends on the setting in the RECORD SETUP MENU.
58
Chapter
4