Network Setup Menu; Config - EverFocus EDR810H Insruction Manual

Dvr
Hide thumbs Also See for EDR810H:
Table of Contents

Advertisement

3.7 Network Setup Menu

Diagram 3.10 is a screen shot of the NETWORK SETUP MENU. This menu is for
setting up the configurations for networking to the DVR. There are 4 subentries that
are CONFIG, ALARM, EMAIL, PASSWORD, and WIRELESS (only in our
mobile DVRs) in the NETWORK SETUP MENU. Each of them has to be set up
completely before the network functions. Please refer to the Networking Chapter of
this manual to fully understand how to setup your network for this DVR. In the
Network Setting Menu the following fields are defined as follows:
Note: Since every Network Configuration is different, please contact your
Network Administrator or ISP for how to assign those IP addresses and
port numbers.
3.7.1

CONFIG

In the CONFIG of the NETWORK SETUP MENU, we define:
DHCP: Enable or disable the Dynamic Host Communication Protocol.
YES: Enable DHCP service.
NO: Disable DHCP service.
Diagram 3.10
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edr810mEdr410mEdr410h

Table of Contents