Record Mode - EverFocus EDR810H Insruction Manual

TOP: The time stamp will show on the top.
WATER MARK:
ON: Shows a water mark on the picture when copying image to USB
flash memory.
OFF: This erases the water mark on the picture when copying image
to USB flash memory.
RESOLUTION: The resolutions for NTSC are 720x480, 720x240 and
360x240 to be selected. Its default value is 720x240. The resolutions for
PAL are 720x288, 720x576 and 360x288 to be selected. Its default value
is 720x288.
NOTE: Selecting a certain resolution will determine the amount of IPS
the DVR will support.
NTSC
720x480 = 30 IPS
(this IPS value is divided by the amount of cameras installed)
720x240 = 60 IPS
(this IPS value is divided by the amount of cameras installed)
360x240 = 120 IPS
(this IPS value is divided by the amount of cameras installed)

RECORD MODE:

REWRITE: Continue recording. Disk will be overwritten if it is full.
STOP: Stop recording when disk is full.
24