Table of Contents
Advertisement
Speed dialling
A speed dialling list is available for frequently used telephone numbers. Up to 100
phone numbers with up to 24 digits each can be stored. These phone numbers can
be dialled by every subscriber.
Speed dialling is carried out via the key sequence
represent the speed dialling index.
It is possible to dial additional digits after the speed dialling number. To do this,
simply enter the requested digits after the speed dialling number.
If the feature automatic exchange connection has been activated and if the handset is
lifted, it is possible to switch to the internal dialling tone by means of the key
sequence
. Afterwards, the requested speed dialling number can be entered.
After 10 seconds, the telephone system automatically switches to the internal dialling
tone.
Please consult the chapter "speed dialling" in the installation guide for further
information.
Completion of Call to Busy Subscriber (CCBS)
If the destination subscriber's line is busy, the connection will be set up automatically
as soon as the external or internal destination subscriber terminates his call. The
CCBS has to be enabled by the calling subscriber. As soon as the destination
subscriber hangs up the receiver, a call is signalled to the caller. Upon picking up the
receiver, the connection to the destination subscriber is being set up without any
further dialling required. The automatic connection setup is then terminated.
Initiation of a CCBS depends on the kind of terminal used:
If a DTMF dialling terminal is used, CCBS can be enabled via the following key
sequence:
o
o
Features
enabling of CCBS:
disabling of CCBS:
-
12
. The keys
-
Advertisement
Table of Contents
