Call Park; Group Listening; Sms - TIPTEL IP-284 Manual

Enterprise IP Phone

Call Park

Call Park is a feature that allows a person to put a call on hold at one telephone set and
continue the conversation from any other telephone set.
The "call park" feature is activated by pressing a preprogrammed button or a special
sequence of buttons. This transfers the current conversation to an unused extension
number and immediately puts the conversation on hold. The telephone system will then
display the extension number of the parked call so that the call can later be retrieved.
To assign the key as Call Park:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the key you
want to make the assignment, there is a pull-down menu in the Type field, choose
KeyEvent from the list, then in the Mode field, open the pull-down menu and
choose Call Park from the list.
2) In the "Line" field, select a line for which to apply this key, and enter the extension
number you want to park.
3) Press Confirm button to save the changes.

Group Listening

When the key is configured as Group Listening key, you are allowed to enable the
Speakerphone and Handset/Headset mode at the same time. It is suitable for the group
conversation which has more than one person at one side. You are able to speak and
listen using handset/headset; meanwhile the others near by can speak and listen using
speakerphone. You can get back to the previous mode by pressing the key again. (If the
current mode is handset or headset, users can press the speaker button to open or
close the group listening function).
To assign the key as Group Listening:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the key you
want to make the assignment, there is a pull-down menu in the Type field, choose
KeyEvent from the list, then in the Mode field, open the pull-down menu and
choose Group Listening from the list.
2) Press Confirm button to save the changes.

SMS

When the key is configured as SMS key you are allowed to access SMS quickly by
pressing this key.
To assign the key as SMS:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the key you
want to make the assignment, there is a pull-down menu in the Type field, choose
KeyEvent from the list, then in the Mode field, open the pull-down menu and
choose SMS from the list.
2) Press Confirm button to save the changes.
Using the Advanced Phone Functions
- 58 -