Ricoh Aficio SP 5200DN Operation And Use Manual page 817

success but invalid key
The supplicant received a message reporting that EAP authentication was successful, but the EAPOL key
was invalid.
supplicant unbound
The supplicant is not connected to the unbound access point.
supplicant started
The supplicant has just started.
terminated.
IKE service has stopped because any configurations for the manual SA and IKE does not exist.
Terminated.
The bonjour (rendezvous) function is disabled.
There is problem in dhcp server operation.
There is a problem with the DHCP server.
If multiple DHCP servers are active on the network, check that they are assigning unique IP addresses to
each printer.
The print server received error <error number> during attempt to log in to the network. Access
to the network was denied. Verify that the print server name and password are correct.
Login to the file server failed when the print server was online. The print server is not registered or a password
is specified. Register the print server without specifying a password.
too many pictures.
PictBridge printing failed because too many images are sent during one print transaction. Reduce the
number of images at one print transaction.
trap account is unavailable.
v3Trap cannot be sent. This could be because the Trap destination account is different from the account
specified by the printer.
unauthenticated
The authentication failed. The supplicant was denied access to the access point, or was not authenticated.
Updated (option name) (value) via DHCPv6 Server
The parameter obtained from the DHCP server has been updated.
usbd is disabled.
Plug and Play is unavailable because the printer is in security mode. Enable USBD in Security Mode.
Message List
2
107