Ricoh Aficio SP 5200DN Operation And Use Manual page 814

2. Remote Maintenance Using telnet
Open log file <file name>
The specified log file was opened when the print server was online.
papd start. (AppleTalk)
The papd (Printer Access Protocol Daemon) has started.
permission denied.
2
The permission was denied after checking the user name and host address at the job cancel (except for
the root permission).
pserver start. (NetWare)
NetWare service has started in print server mode at the print server operation.
Printer <printer name> has no queue
The print queue is not assigned to the printer when the print server was online. Assign the print queue to
the printer using NetWare administrator account, and then restart the printer.
Print queue <print queue name> cannot be serviced by printer 0, <print server name>
The print queue cannot be established when the print server is online. Make sure that the print queue exists
on the specified file server.
Print server <print server name> has no printer
The printer was not assigned to the print server when the print server was online. Use the NetWare
administrator account to assign the printer, and then restart the printer.
print sessions full
No more print jobs can be accepted. Wait a while before sending any more print jobs.
Required file server(<file server name>) not found
The required file server <file server name> could not be found.
restarted.
The LPD has started.
sap enable, saptype=<SAP type>, sapname=<SAP name>
The SAP function was started. The SAP packet is issued to advertise the service in the SAP table on the
NetWare server.
server certificate invalid
The server ID is disabled. Check the server authentication.
server identity invalid
The server ID is disabled. Check the server name authentication.
104