Ricoh Aficio SP 5200DN Operation And Use Manual page 75

Sp 5200dn; sp 5210dn printers

Hide thumbs Also See for Aficio SP 5200DN:

Table of Contents

The removed screws are required to fasten the controller board.

Gripping the handles, carefully pull out the controller board.

Place the controller board on a flat surface.

The hard disk is installed in the slot shown in the illustration below.

Insert the protrusion on the front end of the hard disk board into the notch on the back panel

of the controller board.

Be sure to set the hard disk board parallel with the controller board.

Installing the Memory Expansion Units

Chapters

Table of Contents

Aficio sp 5210dn