Ricoh Aficio SP 5200DN Operation And Use Manual page 587

1. Select [Simple (Limitation)] in the "Printer Job Authentication" list in the "Printer Job
Authentication Settings" area.
Specify the range in which [Simple (Limitation)] is applied to Printer Job Authentication.
If you specify IPv4 or IPv6 address range, proceed to step 2.
If you specify [Parallel Interface (Simple)], proceed to step 3.
If you specify [USB (Simple)], proceed to step 4.
2. Select [IPv4 Address 1], [IPv4 Address 2], [IPv4 Address 3], [IPv4 Address 4], or [IPv4
Address 5], and then enter the IPv4 address on the "Limitation Range (IPv4)" area.
Be sure the number you enter for End IPv4 Address is larger than that for Start IPv4 Address.
If you want to use IPv6, specify the IPv6 address in the "Limitation Range (IPv6)" area.
3. Click [Apply] in the "Parallel Interface (Simple)" area.
4. Click [Apply] in the "USB (Simple)" area.
5. Click [On] in the "Integration Server Authentication Settings" area.
To not use secure sockets layer (SSL) for authentication, click [Off].
6. Enter the [Integration Server Name] box.
7. Select "Authentication Type" in the list.
If you set "Authentication Type" to [Windows Authentication (NT Compatible)] or [Windows
Authentication (Native)], you can use the global group. If you set "Authentication Type" to [Notes
Authentication], you can use the Notes group. If you set "Authentication Type" to [Basic Authentication
(Integration Server)], you can use the groups created using the Authentication Manager.
8. Enter the [Domain Name] box.
9. When setting a new group, enter the group name in the blank area of the "Group Settings
for Integration Server Authentication" box, and then specify the function.
10. Click [OK].
11. Click [Logout].
12. Close Web Image Monitor.
Integration Server Authentication
3
49