Ricoh Aficio SP 5200DN Operation And Use Manual page 446

4. Making Printer Settings Using the Control Panel
Bidirectional Comm.
Specify whether to enable or disable bi-directional communication.
Default: [On]
• On
• Off
Wireless LAN
Configure settings for Wireless LAN. This menu appears only when the optional Wireless LAN interface
unit is installed.
Communication Mode
Specify the transmission mode for Wireless LAN.
4
Default: [Infrastructure Mode]
• 802.11 Ad-hoc Mode
• Infrastructure Mode
SSID Setting
Specifies SSID to distinguish the access point in [Infrastructure Mode] or [802.11 Ad-hoc Mode].
The characters that can be used are ASCII 0x20-0x7e (32 bytes).
If blank is specified in [802.11 Ad-hoc Mode], "ASSID" appears.
Ad-hoc Channel
Specify the channel to use when [802.11 Ad-hoc Mode] has been selected. Set the channel
that matches the type of wireless LAN being used. The channel in use might differ depending on
the country.
The following channels are available:
• IEEE 802.11a/b/g Wireless LAN
Frequency range:
2412 - 2472 MHz (1 - 13 channels)
5180 - 5240 MHz (36, 40, 44, and 48 channels)
In some countries, only the following channels are available:
• IEEE 802.11b/g Wireless LAN
Frequency range:
2412 - 2462 MHz (1 - 11 channels)
Default: [11]
• IEEE 802.11a/b/g Wireless LAN
132
(mainly Europe and Asia)
(mainly North America)