2. Network Connection
3.
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian.
4.
Click [PostScript 3 Printer Driver].
2
Under Windows Vista/7, and Windows Server 2008, proceed to step 6.
5.
Click [Next].
6.
Click [Local printer attached to this computer], and then click [Next].
Under Windows Vista/7, and Windows Server 2008, click [Add a local printer].
7.
Click [Create a new port:].
8.
Select [LPR Port], and then click [Next].
9.
Enter the printer's IP address in the [Name or address of server providing lpd] box.
10.
Enter "lp" in the [Name of printer or print queue on that server] box, and then click [OK].
11.
Select the brand name and model name of the printer you want to use, and then click [Next].
12.
Follow the instructions that appear. Modify settings such as printer name, default printer,
and printer sharing configuration, as necessary. You can also print the test page.
13.
Click [Finish].
• To stop installation of the selected software, click [Cancel] before the installation is complete.
• A message appears if there is a newer version of the printer driver already installed. If there is, you
cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add
Printer]. See p.51 "Messages Displayed When Installing the Printer Driver".
Using the WSD Port
This describes how to install the PCL or PostScript 3 printer drivers using the WSD port.
• The WSD port can be used only under Windows Vista/7 or Windows Server 2008/2008 R2.
• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
• You can connect to the printer only if both the printer and computer are on the same network segment,
or "Network discovery" is enabled. For details, see Windows Help.
18