Ricoh D158 Service Manual page 929

Communication Switch 04 (SP No. 1-104-005)
No Function
Remote mode switch (TEL
mode)
0
0: Disable
1: Enable (Active)
Remote mode switch (FAX
mode)
1
0: Disable
1: Enable (Active)
Remote mode switch (AUTO
mode)
2
0: Disable
1: Enable (Active)
Communication Switch 05 (SP No. 1-104-006)
No Function
Remote mode switch number
0-3
00-09 (0-9:HEX)
Communication Switch 07 (SP No. 1-104-008)
No Function
G3/G4 auto route selection
0 0: Disable
1: Enable
G3/G4 auto route selection
(when communication failed)
4
0: Disable
1: Enable
Communication Switch 09 (SP No. 1-104-009)
No Function
Minimum interval between
0-7
automatic dialing attempts
SM
Comments
Set this bit to ON when you wish to switch TEL
mode to FAX mode remotely.
Set this bit to ON when you wish to turn on the
remote mode switch after automatic reception
with FAX mode.
Set this bit to ON when you wish to turn on the
remote mode switch after automatic reception
with AUTO mode.
Comments
Enter the number to switch between TEL/FAX
modes using the external phone.
Comments
Select whether to change the route to G4 to G3
when G4 communication failed.
If there is a switching system error, select
whether to switch the route to G4 to G3.
Comments
This value is the minimum time that the machine
waits before it dials the next destination.
87
Bit Switches - 3
D702