Ricoh D158 Service Manual page 876

Error Codes
Code Meaning
14-51 UCS Destination Download
Error
14-60 Send Cancel Failed
14-61 Notification Mail Send Failed
for All Destinations
14-62 Transmission Error due to the
existence of zero line page
15-01 POP3/IMAP4 Server Not
Registered
15-02 POP3/IMAP4 Mail Account
Information Not Registered
15-03 Mail Address Not Registered
15-10 DCS Mail Receive Error
15-11 Connection Error
15-12 Authorization Error
15-13 Receive Buffer Full
D702
Suggested Cause/Action
Not even one return notification can be
downloaded:

The address book was being edited.

The number for the specified destination
does not exist (it was deleted or edited
after the job was created).

The cancel operation by the user failed to
cancel the send operation.

All addresses for return notification mail
failed.

When the 0 line page exists in received
pages with G3 communication, the
transmission is interrupted.

At startup, the system detected that the IP
address of the POP3/IMAP4 server has
not been registered in the machine.

The POP3/IMAP4 mail account has not
been registered.

The mail address has not been registered.

Error other than 15-11 to 15-18.
The DNS or POP3/IMAP4 server could not be
found:

The IP address for DNS or POP3/IMAP4
server is not stored in the machine.

The DNS IP address is not registered.

Network not operating correctly.
POP3/IMAP4 send authorization failed:

Incorrect IFAX user name or password.

Access was attempted by another device,
such as the PC.

POP3/IMAP4 settings incorrect.

Occurs only during manual reception.
Transmission cannot be received due to
insufficient buffer space. The buffer is
being used for mail send or
Scan-to-Email.
34 SM