Ricoh D158 Service Manual page 470

Main SP Tables-1
High:1st CPM:25
026
(D160/D161/D170)
High:2nd CPM:25
027
(D160/D161/D170)
High:3rd CPM:25
028
(D160/D161/D170)
[Fusing Nip Band Check]
1152
Checks and adjusts the nip of the hot roller and pressure roller.
001 0:OFF, 1:ON
002 Pre-idling Time
003 Stop Time
[Fusing Jam Detection] (D158/D159)
[Fusing Jam SC] (D160/D161/D170)
1159
This SP mode detects SC559. Set this SP mode to 'Yes' if the machine
experiences paper jam problems on a continual basis.
SC Display
001
(Fusing Jam SC)
[MotorSpeedAdjust]
1801
Adjusts the speeds of each motor.
MainMonitor:122
001
Adjusts the speed of main motor.
MainMonitor:100
(D158/D159)
002
Adjusts the speeds of main motor.
010 Duplex:Low (D158/D159)
D158/D159/D160/D161/D170
*ENG [10 to 100 / 50 / 1 % / step]
*ENG
[10 to 100 / 50 / 1 % / step]
*ENG [10 to 100 / 50 / 1 % / step]
ENG
[0 or 1 / 1 / 1 / step]
*ENG
[0 to 999 / 300 / 1 sec / step]
*ENG [0 to 100 / 20 / 1 sec / step]
*ENG [0 to 1 / 0 / 1 / step]
*ENG [-4.00 to 4.00 / 0.00 / 0.01 % / step]
*ENG [-4.00 to 4.00 / 0.00 / 0.01 % / step]
*ENG
[-4.0 to 4.0 / 0.0 / 0.1 % / step]
3-12 SM Appendix