Ricoh D158 Service Manual page 482

Main SP Tables-2
[Process Data Dilay] (D158/D159)
[ID Error Analysis] (D160/D161/D170)
Displays:
a) Vt: the current TD sensor output value and
2220
b) Vref: the target TD output value Vts (SP2-926) + correction for ID sensor
output.
The TD sensor output value changes every copy. If a > b, toner is supplied to
the development unit.
001 Vsp
002 Vsg
003 Vsdp
004 Vt
005 Vtref
[Copies After Toner Near End] (D158/D159)
2224
Current counter after near end.
001 Counter
[Transfer Current Adjust] (D158/D159)
2301
-
001 Thin:1side:Image Area
002 Thin:1side:Lead Edge
003 Thin:1side:Trail Edge
004 Thin:2side:Image Area
005 Thin:2side:Lead Edge
006 Thin:2side:Trail Edge
007 Plain:1side:Image Area
D158/D159/D160/D161/D170
*ENG
[0.00 to 9.99 / 0.00 / 0.01 vol / step]
*ENG [0.00 to 9.99 / 0.00 / 0.01 vol / step]
*ENG [0.00 to 9.99 / 0.00 / 0.01 vol / step]
*ENG [0.00 to 9.99 / 0.00 / 0.01 vol / step]
*ENG [0.00 to 9.99 / 2.5 / 0.01 vol / step]
*ENG [0 to 999 / 0 / 1 sheet / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG
[-8 to 8 / 0 / 1 uA / step]
*ENG
[-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
3-24 SM Appendix