Ricoh D158 Service Manual page 912

Bit Switches - 1
No Function
Report printout after an original
jam during SAF storage or if the
1 SAF memory fills up
0: Enabled
1: Disabled
Received fax print start timing
(G3 reception)
3
0: After receiving each page
1: After receiving all pages
Received fax print start timing
(G4 reception)
4
0: After receiving each page
1: After receiving all pages
Action when a fax SC has
occurred
7
0: Automatic reset
1: Fax unit stops
D702
System Switch 1F (SP No. 1-101-032)
0: When an original jams, or the SAF memory
overflows during scanning, a report will be
printed.
Change this bit to "1" if the customer does not
want to have a report in these cases.
Memory tx – Memory storage report
Parallel memory tx – Transmission result
report
0: The machine prints each page immediately
after the machine receives it.
1: The machine prints the complete message
after the machine receives all the pages in the
memory.
0: The machine prints each page immediately
after the machine receives it.
1: The machine prints the complete message
after the machine receives all the pages in the
memory.
0: When the fax unit detects a fax SC code
other than SC1201 and SC1207, the fax unit
automatically resets itself.
1: When the fax unit detects any fax SC code,
the fax unit stops.
Comments
70 SM