Ricoh D158 Service Manual page 631

5857 [Save Debug Log] (D158/159)
On/Off (1:ON 0:OFF)
001
Switches the debug log feature on and off. The debug log cannot be captured
until this feature is switched on.
Target (2: HDD 3: SD)
002
Selects the storage device to save debug logs information when the
conditions set with SP5-858 are satisfied.
Save to HDD
005
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
006
Saves the debug log of the input SC number in memory to the SD card.
Copy HDD to SD
Card(Latest 4MB)
Takes the most recent 4 MB of the log written to the hard disk and copies
009
them to the SD Card.
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card.
Copy HDD to SD
Card(Latest 4MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it
to the SD Card.
010
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card. This SP does not execute if there is
no log on the HDD with no key specified.
SM Appendix
[0 or 1 / 0 / 1/step]
*CTL
0: OFF, 1: ON
[2 or 3 / 2 / 1/step]
*CTL
2: HDD, 3: SD Card
*CTL [-999999 to 999999 / 0 / 1/step]
*CTL [-999999 to 999999 / 0 / 1/step]
[- / - / -]
*CTL
[Execute]
[- / - / -]
*CTL
[Execute]
3-173
Main SP Tables-5
D158/D159/D160/D161/D170