Ricoh D158 Service Manual page 921

Maximum print width used in
the setup protocol
Bit 4 Bit 3
3-4 0 0
0 1
1 0
1 1
Received message width
restriction in the protocol signal
7
to the sender
0: Disabled
1: Enabled
Relationship between available paper sizes and printer width used in the setup protocol
Available Paper Size
A4 or 8.5" x 11"
B5
A5 or 8.5" x 5.5"
No paper available (Paper end)
No Function
1st paper feed station usage for
fax printing
0
0: Enabled
1: Disabled
2nd paper feed station usage
for fax printing
1
0: Enabled
1: Disabled
SM
Printer Switch 01 (SP No. 1-103-002)
Setting
These bits are only effective when bit 7 of
Not used
printer switch 01 is "1".
A3
B4
A4
0: The machine informs the transmitting
machine of the print width depending on the
paper size available from the paper feed
stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting
machine of the fixed paper width which is
specified by bits 3 and 4 above.
Printer width used in the Protocol (NSF/DIS)
297 mm width
256 mm width
216 mm width
216 mm width
Printer Switch 02 (SP No. 1-103-003)
0: The paper feed station can be used to print
fax messages and reports.
1: The specified paper feed station will not be
used for printing fax messages and reports.

79
Comments
Do not disable usage for a paper feed
station which has been specified by
User Parameter Switch 0F (15), or
Bit Switches - 2
D702