Ricoh D158 Service Manual page 531

[Filter Setting] (D158/D159 )
4903
This SP outputs the final data read at the end of ACC execution.
A zero is returned if there was an error reading the data.
001 Ind Dot Erase: Text
Ind Dot Erase: Generation
002
Copy
[ADS Level] (D160/D161/D170)
4903
Adjusts the ADS level.
001 ADS Level
[ADS Lower Limit] (D160/D161/D170)
4904
Adjusts the ADS lower limit.
001 ADS Lower Limit
[Select Gradation Level] (D158/D159 )
4905
-
001 Select Gradation Level
[ADS Area Select] (D160/D161/D170)
Checks the whole area (0 = All) or the specific areas (1 = One) to adjust the
4905
ADS level. The specific areas are as follows:
ADF: 15 to 90 mm from the left edge
Platen Cover: 15 to 90 mm from the left edge
001 Select Gradation Level
SM Appendix
Photo C Patch Level 1 (8-bit)
*ENG
[0 to 7 / 0 / 1 / step]
Photo M Patch Level 1 (8-bit)
*ENG
[0 to 7 / 0 / 1 / step]
*ENG
[0 to 255 / 252 / 1 / step]
*ENG
[0 to 255 / 80 / 1 / step]
*ENG
[0 to 255 / 0 / 1 / step]
*ENG [0 or 1 / 0 / 1 / step]
3-73
Main SP Tables-4
D158/D159/D160/D161/D170