Exjs Firmware Update - Ricoh D158 Service Manual

Controller Options

EXJS Firmware Update


The Browser Unit consists of the Browser firmware and EXJS firmware. The EXJS
firmware is equivalent to the existing browser firmware. Therefore, it is possible to update
the EXJS firmware using the same procedure as that of SDK application firmware.
-Preparation-
1. Extract the exe file (XXXX. exe), after which the following two files are generated:
XXXX_machine. exe/ XXXX_stock.exe.

Note: The file (XXXX_machine) is for updating the EXJS firmware in the field.
2. Extract the file (XXXX_machine), after which the "SDK" folder is created.

Note: XXXX = part number.
3. Copy the "SDK" folder to an SD card.
-Main procedure-
1. Remove the card slot cover [A] for SD cards (
2. Insert the SD card included for firmware update into SD slot 2 [B].
3. Turn the main switch on.
4. After the Update screen is displayed, select the "Browser".
5. Touch "Update (#)".
6. After the "Update Done" message appears on the screen, turn the main power switch OFF.
7. Remove the SD card from the lower slot.
D158/D159/D160/D161/D170
x 1).
2-90 SM