Ricoh D158 Service Manual page 641

5907 [Plug & Play Maker/Model Name] (D158/159)
Plug & Play
Maker/Model/Name
Selects the brand name and the production name for Windows Plug & Play.
001
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
[Plug & Play] (D160/D161/D170)
Selects the brand name and production name for the Plug and Play function.
These names are stored in the NVRAM. When the NVRAM data is corrupted,
5907
select these names once again. Use the right-arrow or left-arrow key to scroll
through the list of brand names. To select a brand name, press the OK key. An
asterisk (*) indicates which manufacture is currently selected.
001 Plug & Play
5908 [LCT Paper Size] (D158/159)
0: A4 1: LT
001
Specifies the paper size in the LCT.
5913 [Switchover Permission Time] (D158/159)
Print Application Timer
Sets the amount of time to elapse while the machine is in standby mode (and
002
the operation panel keys have not been used) before another application can
gain control of the display.
5919 [State Of Encryption] (D158/159)
001 State Of Encryption
SM Appendix
*CTL See detail below
*ENG
[0 to 19 / 0 / 0 / step]
*CTL
[0 or 1 / 1 / 1 / step]
*CTL
[3 to 30 / 3 / 1sec/step]
[0 or 1 / 0 / 1/step]
*CTL 0: OFF (Not working)
1: ON (Working)
3-183
Main SP Tables-5
D158/D159/D160/D161/D170