Pre-Assembly Inspections And Measurements - MWM Acteon Workshop Manual

• During its operation the tappets perform a rotating movement, responsible for a uniform
distribution of the force, uniforming the waste. It must not have waste on only one area.
• The lubrication holes of the tappets cannot be obstructed.
9.612.0.006.7160 - 05/04
Pre-Assembly Inspections and
Measurements
Visually check the tappets. Check if there are marks
of excessive waste on the contact area with the cams
of the camshaft.
Attention
Visually check tappet lubrication holes.
Attention
Camshaft