Maintenance Table - MWM Acteon Workshop Manual

MAINTENANCE PLAN
A) Up to 50,000 km/year conditions
B) Over than 50,000 km/year conditions
DRAIN FUEL FILTER
CHECK LUBRICANT OIL LEVEL
COLLECT SAMPLE OF LUBRICANT OIL TO ANALYSIS
CHECK COOLANT LEVEL
CHECK FOR LEAKS IN THE ENGINE
CHECK CONNECTIONS
CHANGE LUBRICANT OIL (SAE 15W40 - API CH-4)
CHANGE LUBRICANT OIL FILTER
CHANGE FUEL FILTER
CHANGE AIR FILTER
CLEAN AIR FILTER (if necessary)
ADJUST VALVES CLEARANCE
CHECK DAMPER CONDITIONS
CHECK BELT
CHANGE BELT
CHANGE COOLANT
CHECK FUEL PIPING CONDITIONS
NOZZLES
HIGH-PRESSURE FUEL PUMP
CHECK ELECTRIC CONNECTIONS (Starter Motor and Alternator)
CLEAN AND RETIGHTEN BATTERY TERMINALS
RETIGHTEN ENGINE FIXATION CUSHIONS
CHECK THE TIGHTENING OF THE SCREWS AND NUTS: EXHAUST
MANIFOLD AND ELBOW, TURBOCHARGER FLANGE AND CARTER
CHECK FAN
CHECK TURBOCHARGER (shaft clearance and carcass condition)
Remark: 1) This table is only for guidance. The Maintenance Table of the vehicle prevails over this table.
2) For heavy-duty and off-road services perform maintenance in the half of the indicated periods in the
table above.
3) If the engine stays inactive for a long time, it must perform an idling speed test fortnightly, until to reach
the operation temperature.
4) Independent of the intervals indicated for engine lubricant oil changes, it must be changed at each
6 months.
5) Electronic parts of BOSCH (phase, speed, air pressure and temperature, oil pressure and temperature,
water temperature sensors) are free of maintenance and checked by recommended diagnose scanner
with errors stored in failure memory.
9.612.0.006.7160 - 05/04

MAINTENANCE TABLE

MWM ACTEON VEHICULAR ENGINES
Operation and Maintenance
Initial A
•
•
• •
•
•
•
•
•
•
•
•
• •
•
• •
•
•
•
FREE OF MAINTENANCE
FREE OF MAINTENANCE
•
• •
• •
• •
•
• •
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•