Changing The Power On Configuration - IBM 6400 Setup Manual

Line matrix printers cabinet and pedestal models
Table of Contents

Advertisement

Chapter
3

Changing The Power On Configuration

Changing The Power On Configuration
Configuration
Management
Recall
Save Current
Custom Set
Values
When you power on the printer for the first time, it loads the factory default
configuration. If you power the printer off and then back on, the printer will
load the designated power-on configuration (which is set to Factory Default by
default). It will not load the last saved configuration.
The Change Power On Set option allows you to select a custom set of
configuration values as the power-on configuration. The example on the
following page shows how to select Custom Set 1 as the power-on
configuration.
NOTE: Be sure you define and save a custom set before attempting to use it
106
Delete
Custom Set
Power On Set
Factory Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
as the Power On Custom Set. Otherwise, the current Power On
Custom Set remains selected and the following operator panel
message is displayed:
042 CUSTOM SET DOES NOT EXIST
SAVE FIRST
For example, if you attempt to change the Power On Custom Set
from Custom Set 1 to Custom Set 4, and if Custom Set 4 does not
exist, Custom Set 1 remains the Power On Custom Set.
* = Factory Default
Change
Protect
Custom Sets
Print Custom
Set Values

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents