The Power-On Configuration - IBM 6400 - Model 008 B/W Line-matrix Printer Operator's Manual

The Power On Configuration
When you power on the printer for the first
time, it loads the factory default
configuration.
If you save a custom set, such as Custom
Set 4, and turn the printer off, then back on,
the printer will load the designated power-on
configuration, not the last saved custom set.
For your convenience, you can specify which
custom set should be the power-on set.
Press Stop to place the printer in the
NOT READY state.
2
Press Scroll
PROGRAM state.
3
Press Menu to access the OPERATOR
MENU.
4
Press Scroll
CONFIGURATION MANAGEMENT.
5
Press Enter to enter this menu.
62
+ Scroll ± to unlock the
until you reach
NOT READY
OPERATOR MENU
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
OPERATOR MENU
CONFIGURATION MANAGEMENT
CONFIGURATION MANAGEMENT
RECALL CUSTOM SET
Operator' s Guide