Setting Up The Power Paper Stacker - IBM 6400 Setup Manual

Setting Up The Power Paper Stacker

$
Elevator Disable Switch
Figure 56. Rear Operator Panel
1. Turn the printer ON.
2. Using the rear operator panel, press ONLINE to take the printer offline.
3. Grasp the elevator lift handle and press the elevator disable switch while
raising the elevator to the top of its travel.
Figure 57. Power Stacker Components
4. Make sure the wire paper tent is fitted in the pull out paper tray in the base
of the stacker.
Setting Up The Power Paper Stacker
Elevator Lift Handle
Wire Paper Tent
Paper Tray
$
Paper
Advance
Stacker Up
Stacker
Down
79