Twinax Interface Menu - IBM 6400 Setup Manual

Twinax Interface Menu

Twinax
(4)
Interface
(from page 110)
Print Print Character
(3)
Language Table
See the following
page.
Cancel Early Print
(2)
Buffers Complete
Enable* Disable*
Disable Enable
Override
Print Text
Direction Host
Disable*
Control By Host*
Enable
Left to Right
Right to Left
NOTE:
(1)
If the IPDS feature is installed, the 4234-12 option is the
default, and will appear in this menu. If IPDS is not installed, the
4234-12 option will not appear in this menu, and 4234-2
becomes the default.
(2)
If the IPDS feature is installed, the EARLY PRINT
COMPLETE option appears in this menu.
(3)
Does not apply to IPDS.
(4)
The Twinax and Coax interface menus only appear in the
menus if the IBM Coax/Twinax is installed.
Active Print
Language
Standard Print Language* 4234-2*
Alternate Print Language 5225
4234-12
Undefined
Hex
Character
Transparent
Reporting
Control
Enable*
Lead-In Characters
Disable
Set 1 <%>*
Set 2 ¬¬$
Set 3 _%_
User Defined Codes
Alternate Set 80-9F
Control Code
Printable*
Format Maximum
Control Printable Width
Disable* 13.2 inches*
Enable 13.6 inches
Printer
Printer
Emulation Address
Address 0
Address 1*
(1)
Address 2
Address 3
Address 4
Address 5
Address 6
Load Alternate
Undefined
Character
Character
Substitution
Enable*
60*
Disable
40 - FE (HEX)
Hex Print
(3)
Mode
Disable* Port Type
Enable
Timeout
Report Status
To view options, press:
Scroll Scroll
To select an option, press:
To exit the configuration menus
and return to READY, press:
* = Factory Default
World
Trade
Standard Print Language*
Alternate Print Language
LAC
Approximation
Option
On*
Off
C/T Hotport
Twinax - Coax - Disable*
15 Sec*
10 Sec - 180 Sec
Disable*
Enable
Enter Return
Enter
Start
121