Attaching Printer To Remote Control Unit With Twinax Interface - IBM 6400 Setup Manual

Appendix D
Attaching Printer to an AS/400 Host System
Attaching Printer to Remote Control Unit with Twinax
Interface
AS/400's auto configuration program does not support remote attached
printers. You must manually configure this printer as a remote printer attached
to a 5294, 5394, or 5494 Remote Control Unit. Use the following parameters
when configuring this printer as a remote printer on AS/400:
Parameter
Description
Device description DEVD
Device class DEVCLS
Device type TYPE
Device type TYPE
Device model MODEL
Advanced Function AFP
Location Address LOCADR
Online at IPL ONLINE
Attached controller CTL
Font identifier FONT
Form feed FORMFEED
NOTE: AFP *Yes can be specified if the level of OS/400 supports the printer
272
Parameter
Workstation printer name
*RMT
*IPDS (When printer is set to 4234-12 mode.)
4234 (When printer is set to 4234-2 mode.)
0000 (00 if IPDS (4234-12) and 02 if SCS (4234-2))
Type can be set to 6408 or 6412.
CTA for 6408 or 6412 model.
*NO (See Note)
xx
*YES
Remote controller name
yyy (Default font identifier)
* Cont
as an AFP printer and PSF/400 is installed.
Parameter Setting