IBM 6400 Setup Manual page 65

Parallel Connector
Serial Connector
NOTE:
(1)
The Dataproducts adapter feature attaches to the PC
Parallel interface connector.
(2)
Twinax, Coax, and Ethernet Interfaces appear only if these
features are installed.
Figure 37. Attaching the Cable Connector and the AC Power Connector
3. Make sure that the printer power switch is set to OFF. See Figure 30 on
page 60.
I/O Connector
4. Remove the cover from the I/O connector you have selected.
Auxiliary I/O
Figure 38. Removing the I/O Cover
Setting Rear Paper Exit
$
AC Power Connector
$
Power Switch
On Off
65