Table of Contents
Advertisement
3441 Power Switch
DANGER
Line voltage is present at the power switch terminals any
time the ac power cable is connected.
Removal
1.
Switch off the printer power.
2.
Disconnect the ac power cable
e.
3.
Remove the top cover (3052).
4.
Remove the two screws
0
and remove the switch
box cover • .
5.
Remove the switch box mounting screws
E)
and
remove the switch box.
6.
Label and remove the wires from the power
switch.
7.
Remove the two screws
E)
and power switch
G.
3-82
SY34-0613
Reinstallation
1.
Reinstall the switch wires.
2.
Reinstall the power switch in the switch box with
the two screws
G.
3.
Place the switch box into position and install the
mounting screws E).
4.
Reinstall the switch box cover with the two screws
O·
5.
Reinstall the top cover (3052).
6.
Connect the ac power cable
e.
Advertisement
Table of Contents
