IBM 6400 Setup Manual page 100

Chapter 3
Changing Parameters
Step Key
5.
Enter
6.
Scroll↑ UNTIL
7.
Enter
8.
Scroll↑
9.
Enter
10. Continue this pattern to make all of the changes, using the information in this chapter.
11. To save changes so that they will remain when the printer is reset or powered back on, see
"" on page 101. If you want to use these values without saving, continue to the next step.
12.
Stop
13.
+
Scroll↑ Scroll↓
14.
Stop
100
LCD Results
PRINTER CONTROL
INTERFACE SELECTION
PRINTER CONTROL
PRINT DIRECTION
PRINT DIRECTION
BIDIRECTIONAL*
PRINT DIRECTION
UNIDIRECTIONAL
PRINT DIRECTION
UNIDIRECTIONAL*
NOT READY
OPERATOR MENU
LOCKED
READY
Notes
Moves into the PRINTER
CONTROL menu.
Moves to the PRINT
DIRECTION parameter.
Move into the PRINT
DIRECTION menu. The asterisk
(*) shows that this is the active
value.
Moves to the next available
option, the UNIDIRECTIONAL
option.
Selects the displayed value. An
asterisk (*) appears indicating
that this choice is now the active
value.
Returns the printer to the NOT
READY mode.
Locks Program mode and the
Operator Menu.
Places the printer in READY
mode, prepared for normal
operation.