IBM 6400 Setup Manual page 172

Chapter 4
Code V Feature (VGL)
•
Off Page Errors
•
•
•
Bar Code Errors
•
•
Character Filtering
•
Ignore Characters. Determines if character filtering is enabled, or if one
or both characters are ignored.
•
•
•
•
•
Select Character 1. Selects character 1 for the character filtering option.
Valid values are from 0 through 255 (decimal). The default value is 0.
•
Select Character 2. Selects character 2 for the character filtering option.
Valid values are from 0 through 255 (decimal). The default value is 0.
172
Disable. (the default.) Does not report errors for elements that start or
end beyond the right edge of the page.
Enable. Reports errors for elements that start or end beyond the right
edge of the page.
Enable. (the default.) Prints an error message when invalid bar code
data is encountered.
Disable. Does not print an error for invalid bar code data and the bar
code will be printed as is.
Disable. (the default.) Does not ignore the characters selected with
the select character options.
Character 1. The character selected using the Select Character 1
option will be ignored in the data string.
Character 2. The character selected using the Select Character 2
option will be ignored in the data string.
Character 1 and 2. Both characters selected using the Select
Character 1 and Select Character 2 options will be ignored in the data
string.